DHM®     DIGITAL HOLOGRAPHIC MICROSCOPY
 
Search
  Home arrow Products arrow Specifications
| Print |
Specifications
R2200 series
R2100 series
 
 R1100 series
R1000 series
 
 T1000 series
 
 
 Koala Software
Objectives
 
 Stroboscopic module
 
 
  
 
 

Stroboscopic module


System configuration and performances    
Fundamental frequency analog output: 0.1 Hz to 25 MHz
Measurement points per fundamental cycle: frequency dependent: up to 2 15 points
Laser pulse length: down to 7.5 ns, up to 2 32 repetitions
Synchronization precision: < 5 ps
Waveform amplitude resolution: 14 bits
Waveform generator: predefined DC, sine, triangular, rectangular or user-defined form
Analog output and offset: 0 to ±10 Volts with ±2% accuracy (up to ±200 Volts with optional M-22100, max. 100 kHz)
Analog output impedance / max. current: 50 Ω / 100 mA
Number of inputs: 2 analog (-10 V to +10 V) and 2 digital 3.3-5 V TTL, synchronized with the measurement
Analog input impedance: 100 kΩ
Device control: preset or user-defined amplitude and / or frequency scanning duty cycle
Stroboscopic module configuration: M-16000 basic stroboscopic module including master board and one I/O card (M-22100)
  M-22100 additional I/O card for master board (M-16000) or slave board (M22040)
    includes 1 analog output ±10 V, max. 25 MHz, I max 100 mA
    up to 4 I/O cards per board
  M-22040 additional slave board for up to 4 additional I/O cards (M-22100)
    max. 64 boards, 256 excitation signals
High power module configuration: M-16010 motherboard for up to 2 amplification cards (M-22110)
  M-22110 ×20 amplification card for 1 analog output ±200 V, max. 100 kHz, I max 10 mA
Compatibility: DHM R1100 series & DHM T1001

Specifications are subject to change without notice